Jul 20, 2020     Rudder Tail Light Install - (2.5 hours)       Category: Lighting

Primed the trailing edge skin where the tail light bracket attaches with zinc phosphate primer.
Used butt splices p/n 320559 (Aircraft Spruce) to connect the tail light to 18 awg. wire. Also used heat shrink p/n HST-1/8 and HST-3/16 (Wicks) to hold the wires together.
Riveted the tail light bracket to the rudder with 10 ea. A4 rivets.
Screwed the tail light to the bracket with #6 screws and tested the light to make sure it works.